Skip to main content

Lybroco Rentals

Mini Excavator Rentals in Edmonton

Mini Excavator Rentals in Edmonton

Digging a trench for a water line, footings for a deck, or landscaping a tight backyard? Lybroco Rentals rents mini excavators in Edmonton, from a compact machine just under 4,000 lb up to larger compact excavators around 20,000 lb.

Which mini excavator do I need?

If your job is…Look atWhy
Backyards, tight gates, inside buildings, small trenches1.5 ton class (XCMG XE18U)3,968 lb with a retractable undercarriage (39 in narrowest), zero tail swing, 7 ft 6 in dig depth
Utility trenches, deck and fence footings, landscaping3 to 4 ton class (Case CX30C, CX37C, CX42D)About 6,300 to 9,300 lb, zero tail swing for working beside walls and fences
Bigger trenching, foundations, heavier digging5 ton class (Cat 305.5E2 CR, XCMG XE55U)About 11,600 to 12,600 lb, around 12 ft of dig depth
Larger sites and heavier work8 ton class (Bobcat E88, XCMG XE80U)About 19,600 to 20,400 lb with 13 to 15 ft of dig depth

Before you book, check four things: how deep you need to dig, how wide your narrowest access is, whether you are working beside a wall or fence (tail swing matters), and how you will haul the machine.

  • Zero tail swing means the back of the machine stays within the tracks as it turns, so you can work tight to a wall. Our Case machines and the XCMG XE18U are zero tail swing.
  • Reduced or compact radius machines (Cat 305.5E2 CR, XCMG XE55U and XE80U) overhang a little; Cat says the 305.5E2 CR upper stays within 5.5 in of the undercarriage.
  • Conventional tail swing (Bobcat E88) needs the most clearance behind the machine.

Mini excavators in our Edmonton fleet

These are the makes and models in our rental fleet, grouped by the listing in our online catalog. When you book a listing you get one of the models shown for it. Brands: XCMG, Case, Caterpillar and Bobcat.

Catalog listingMake and modelOperating weightMax dig depthWidthTail swing
Mini 1.5 ton ExcavatorXCMG XE18U3,968 lb7 ft 6 in39 in / 4 ft 3 in (retractable)Zero tail swing
3-3.9Ton Mini ExcavatorCase CX30Cjust over 6,300 lb——Zero tail swing
3-3.9Ton Mini ExcavatorCase CX37C7,990 lb10 ft 3 in—Zero tail swing
4 Ton Mini ExcavatorCase CX42D9,259 lb——Zero tail swing
5 Ton Mini ExcavatorCaterpillar 305.5E2 CR11,596 lb (canopy) / 11,958 (cab)152 in (long stick)—Compact radius (upper stays within 5.5 in of tracks)
5 Ton Mini ExcavatorXCMG XE55U12,566 lb11 ft 11 in6 ft 4 inReduced tail swing
8 Ton Mini ExcavatorBobcat E8819,600 lb182 in86.6 inConventional tail swing
8 Ton Mini ExcavatorXCMG XE80U20,392 lb13 ft 1 in7 ft 7 inReduced tail swing
Specs are taken from each manufacturer’s published spec sheet, operator manual or product page for that model. “—” means we could not confirm that figure for our machines’ model year from the manufacturer, so ask us before relying on it. Ratings can change with model year, options and configuration: always check the capacity decal and operator’s manual on the machine. Browse: All excavators

Before you dig, and who can operate

Before you dig, get utilities located. In Alberta, submit a locate request through Utility Safety Partners’ Click Before You Dig service. It is free (Utility Safety Partners is a not-for-profit) and only takes a few minutes online. Utility Safety Partners asks contractors to request locates at least 3 to 5 days before you plan to dig, and to wait until all utilities have been located and marked before digging. Online requests have been mandatory for contractors since January 1, 2020; if you are in a remote area without internet, they can take the request by phone at 1-800-242-3447.

Operators: under Alberta’s OHS Code, a worker must not operate powered mobile equipment unless they are trained to operate it safely, have demonstrated competency to a competent worker designated by their employer, are familiar with the operating instructions, and are authorized by their employer (OHS Code Part 19, s.256). Make sure whoever runs the machine meets these requirements before it arrives on site.

Rental periods

Most equipment rents by the day, the week or the 4-week period:

  • Day: 24 consecutive hours
  • Week: 7 consecutive days
  • 4 weeks: 4 consecutive weeks
  • The minimum rental varies from 1 day to 4 weeks depending on the machine.
  • Rentals are based on up to 8 hours of use per day, 40 hours per week or 160 hours per 4-week period. Extra hours on metered equipment are charged.

Rates change, so we do not list them here. See current rates and availability in our online catalog, or ask us for a quote.

Delivery, pick-up and hours

Delivery area: we deliver across the greater Edmonton area, including Sherwood Park, St. Albert, Spruce Grove, Leduc, Nisku and Fort Saskatchewan. Our own trucks run within about 160 km of our yard, and we can arrange delivery further out, so ask. There is a charge for delivery and pick-up, based on the type of equipment and the distance travelled.

Pick-up and yard hours: you can also pick up from our yard at 1810 Yellowhead Trail NE, Edmonton AB T6S 1B4. We are open Monday to Friday, 8:00 AM to 5:00 PM. We are closed Saturdays, but Saturday pick-up or delivery is available by appointment.

Towing it yourself? Most of our equipment can be towed behind a half-ton truck or equivalent SUV with a properly sized and rated ball and hitch, but some machines need a three-quarter-ton truck, and larger machines need a heavy transport company or our delivery. Ask us which applies to your machine.

Equipment must come back with the same amount of fuel it went out with, much like a rental car.

Mini excavator rental FAQ

What size mini excavator do I need?

For backyards and tight access, the 1.5 ton class. For most residential trenching and footings, 3 to 4 ton. For foundations and bigger trenches, 5 ton. For larger sites, the 8 ton class. Compare dig depths in the table with how deep you need to go.

How deep can a mini excavator dig?

From 7 ft 6 in on the XCMG XE18U to 182 in (about 15 ft) on the Bobcat E88, per the manufacturers. See the table for each model.

Can I work right beside a wall or fence?

Choose a zero tail swing machine: our Case CX30C, CX37C and CX42D, and the XCMG XE18U.

Can I tow a mini excavator myself?

Smaller machines can be towed if your truck, hitch and trailer are rated for the machine plus the trailer: operating weights run from 3,968 lb to over 20,000 lb. Larger machines need our delivery or a heavy transport company.

Do I need a locate before digging?

Yes. Request a free locate through Utility Safety Partners’ Click Before You Dig at least 3 to 5 days before you dig, and wait until all utilities are located and marked.

Related equipment

Request a quote or book online

Tell us the job, the dates and the delivery address, and we will match you with the right machine. Prefer to talk it through? Call 1-800-674-1018.